Setting up your Standard Silent Disco.

1. Plug the deck into a 230V outlet.

2. Make sure that the power switch on the 3 way socket is turned on.

3. Check that the three transmitters are on and they are displaying channels 1, 2 and 3. If they are not on, check that the power leads have not come out during transit and that the power selector switch on the back of each transmitter is turned to “high”. If two or more transmitters are displaying the same number on the front, press the “channel” buttons on each unit until 1, 2 and 3 are displayed across the three transmitters.

4. Press and hold the power button on one of the Bluetooth receivers. The blue and red LED will start flashing, to indicate that the unit is ready to pair. Navigate to the pairing screen on your phone and ensure that your phone is discovering new devices. Select the receiver - “NFC-19” and agree to pair this with your phone. Open your music app and play a track, to test the system.

5. Turn on a headset, by finding the green, two position switch on the underside of one of the ear pieces. Use the green channel selection switch on the side of the earpiece to find the channel you have just configured. Adjust the volume wheel on the other earpiece to hear the music at an appropriate level.

6. Repeat from step 4 with 2 more music sources (mobile phones).

7. You should now be ready to party.